Shop

Waterproof material protects even in heavy rain

The bag is made of 100% waterproof polyester. Its contents stay dry regardless of weather conditions, which will be especially appreciated on long trips or rainy commutes. A drainage hole in the bottom prevents water from collecting inside the bag.

EPE foam absorbs shocks on demanding terrain

An EPE foam insert placed between the material layers effectively absorbs impacts and vibrations. Glasses, headphones, and other sensitive items remain safe even when riding on uneven surfaces or gravel roads.

The elastic band ensures a secure grip on the bottle

The adjustable drawstring with a locking mechanism tightly secures bottles up to 9 cm in diameter, eliminating the risk of contents falling out while riding. Removing the bottle with one hand is a matter of seconds—no need to stop along the way.

Five mounting locations for convenient setup

Two Velcro straps and an elastic cord allow you to mount the bag on the front of the handlebar, on the left or right side, or on the bike frame. The bag fits road, mountain, and folding bikes, while maintaining adequate knee clearance.

Lightweight construction does not burden the bike

Weighing just 76g, the bag adds virtually no weight to your kit. Its 1-liter capacity allows you to carry what you really need—a water bottle, a snack, sunglasses, or gloves—without adding unnecessary weight to your gear.

IPX4 case protects the phone from rain

The closed design protects the device from splashes and rain while driving. The charging port is equipped with a silicone cap that helps prevent moisture and dust from entering the interior.

The magnetic mechanism speeds up the assembly of the housing

A built-in magnetic module holds the case securely in place, while a push-and-turn release mechanism makes it easy to remove. You can easily take your phone with you without removing the base from your handlebar.

Silicone elements reduce vibrations

An internal silicone pad and an external shock-absorbing module help absorb shocks generated by uneven surfaces. The non-slip surface increases the stability of the phone inside the case.

The ball joint makes it easier to position the screen

The holder rotates 360° and tilts to adjust the phone's position for navigation. The design allows you to quickly switch between portrait and landscape orientation.

TPE foil retains access to phone functions

The transparent film allows you to operate the touchscreen without opening the case. The bottom opening allows you to connect the charging cable, and the rear window provides access to the main camera and code scanning area.

Choose the most convenient way to unlock

The lock can be opened with a fingerprint, a Bluetooth-enabled app, or a traditional key. The biometric reader recognizes the fingerprint in approximately 0.5 seconds, and additional access methods allow you to use the lock even when your phone or battery are unavailable.

Manganese steel ensures high durability

The body is made of 65Mn manganese steel, and the components are connected with high-strength riveted joints. An external ABS cover protects the structure and reduces the risk of scratching the frame during everyday use.

USB-C charging reduces downtime

The battery can be charged via USB-C in about 2-3 hours. Once fully charged, the lock remains in standby mode for up to 2-3 months, reducing the need for frequent charging.

Foldable design makes it easy to transport

When folded, the lock takes up minimal space and can be stored in the included frame-mounted holder. Its approximately 90 cm length when unfolded makes it easy to lock the bike to various fixed structures.

Suitable for everyday outdoor use

The covers protect the fingerprint reader and USB-C port from dust and splashes. The design is designed for use in daily rainfall, but the manufacturer does not recommend prolonged immersion or leaving the lock in water.

Combination lock eliminates the need to carry keys

The lock utilizes a resettable mechanism with a 4-digit code that can be set to your preferences. Approximately 10,000 possible combinations increase security, and opening is quick and keyless. The lock's rotating design makes reading the digits and daily operation easier.

Durable construction increases bike protection

The body is made of alloy steel and zinc alloy, and the six thickened segments create a solid structure designed to secure the bike while parked. The materials used in the lock increase resistance to mechanical damage and make it difficult to force.

Foldable design makes storage easier

After your ride, the lock can be quickly folded down to a compact size. With a length of 85 cm, you can easily secure your bike, scooter, or motorcycle, and when folded, the lock takes up very little space.

The mounting bracket ensures convenient transport

The kit includes a mounting bracket that can be attached to the frame using screws or the included straps. This ensures the lock is always easily accessible and eliminates the need to carry it in a backpack or bag.

ABS coating protects the frame from scratches

The outer ABS layer separates the metal components from the bike's paintwork. The surface is smooth to the touch, reducing the risk of scratches when installing, removing, or transporting the lock.

Flexible construction supports the wrist during movement

The band gently wraps around the wrist, helping to maintain stability during running, strength training, cycling, or team sports. It fits snugly to the hand and promotes comfortable movement.

Soft material ensures comfort throughout your workout

The combination of polyester and cotton makes the band comfortable against the skin. The elastic weave makes it easy to put on and take off and ensures a comfortable fit for various wrist sizes.

The material helps absorb sweat

The headband is made of moisture-absorbing fabric, so you can conveniently dry your forehead or hands during activity and maintain greater comfort during exercise.

Low weight and airy structure increase comfort

Weighing approximately 44g per pair and breathable material, the bands remain comfortable even during longer training sessions without feeling too heavy.

Solid finish for everyday use

The embroidered logo and carefully crafted edges enhance the product's aesthetic. The material is designed to reduce pilling, helping the wristbands maintain their good looks for a long time.

Breathable material ensures comfort all day long

A blend of polyamide and elastane, along with ventilation panels, helps effectively wick away sweat and accelerates its evaporation, keeping you feeling dry.

Compression supports muscles during exercise

Graduated compression of 15-20 mmHg supports circulation and helps reduce muscle fatigue during cycling and other activities.

Stable fit without slipping

The elastic cuff and fitted cut keep the sock in the right position, and the anti-slip structure increases the stability of the foot in the shoe.

Reinforced zones increase durability

The cushioned forefoot improves comfort, while the reinforced heel better withstands intensive use and retains its shape for a long time.

Better visibility after dark

The reflective logo increases the user's visibility when driving in low light conditions, improving road safety.

Breathable material ensures all-day comfort

A blend of polyamide and elastane, along with ventilation panels, helps effectively wick away sweat and accelerates its evaporation, keeping you feeling dry.

Compression supports muscles during exercise

Graduated compression of 15-20 mmHg supports circulation and helps reduce muscle fatigue during cycling and other activities.

Stable fit without slipping

The elastic cuff and fitted cut keep the sock in the right position, and the anti-slip structure increases the stability of the foot in the shoe.

Reinforced zones increase durability

The cushioned forefoot improves comfort, while the reinforced heel better withstands intensive use and retains its shape for a long time.

Better visibility after dark

The reflective logo increases the user's visibility when driving in low light conditions, improving road safety.

Breathable material ensures comfort all day long

A blend of polyamide and elastane, along with ventilation panels, helps effectively wick away sweat and accelerates its evaporation, keeping you feeling dry.

Compression supports muscles during exercise

Graduated compression of 15-20 mmHg supports circulation and helps reduce muscle fatigue during cycling and other activities.

Stable fit without slipping

The elastic cuff and fitted cut keep the sock in the right position, and the anti-slip structure increases the stability of the foot in the shoe.

Reinforced zones increase durability

The cushioned forefoot improves comfort, while the reinforced heel better withstands intensive use and retains its shape for a long time.

Better visibility after dark

The reflective logo increases the user's visibility when driving in low light conditions, improving road safety.

Waterproof construction protects contents on the go

The bag is made of 600D polyester with TPU and PU layers, and its welded seams reduce water penetration. This ensures that accessories carried on your handlebars are better protected during rain, splashes, and wet riding.

2 liter capacity holds the most necessary accessories

The bag's interior allows you to pack essentials for short trips, such as sunglasses, small tools, a bike lock, a computer, or a pump. A long zipper makes it easy to access the contents, and the extended zipper pull makes it easy to operate the bag even when wearing gloves.

A knob and a strong rope stabilize the bag on the handlebar.

The dial-style mounting system allows you to adjust the tension and securely hold the bag against your handlebars. A strong cable and straps make it quick to install and remove, making it ideal for regular cycling.

PP panels on the sides support the shape of the bag

Side reinforcement made of PP board helps maintain the bag's compact shape and reduces warping. This is a practical solution for transporting small items that need to remain organized and less susceptible to compression.

Additional pockets and a window make organization easier

Side mesh pockets allow you to store small items you need to have quickly at hand. A clear window helps you identify the bag's contents without a long search, and a reflective logo enhances visibility after dark.

Welded seams help protect your luggage from water

The bag is designed for riding in variable conditions. Its welded construction, waterproof TPU layer, and secured zipper reduce moisture penetration, providing better protection for accessories carried on your handlebars during rain and splashes.

4L capacity holds equipment for the route

The bag's extended body provides space for snacks, tools, a water bottle, or other handy items needed while riding. The wide zippered opening makes it easy to pack and quickly access contents without removing the bag from the handlebar.

The knob system securely fastens the bag

A dial mount allows you to secure the bag to your handlebars and adjust the tension. A cable and straps provide stability when riding over bumps, and the entire system facilitates quick installation and removal before your next ride.

600D and TPU material supports everyday durability

600D polyester with TPU creates a construction that withstands the wear and tear of regular cycling. Double-sided PP board reinforcement helps the bag maintain its shape, making contents easier to organize and less likely to crush.

Practical details make it easy to use on the road

A side mesh pocket holds small accessories like keys, tissues, or headphones. A clear window helps you find contents faster, an extended zipper pull makes it easier to use with gloves, and reflective markings enhance visibility in the dark.

The capacity of 0.9 l is enough for handy accessories

The bag's interior allows you to carry your most frequently used items, such as a phone, small tools, glasses, keys, or small bike accessories. This keeps small items within easy reach while keeping your clothing pockets free while riding.

Waterproof design works well on the road

600D TPU-laminated polyester and an IPX4 rating help protect your belongings from splashes. This is a practical solution for daily commutes and trips in rapidly changing weather.

Four-sided PP board supports stable shape

Four-sided reinforcement helps the bag maintain its shape when attached to the frame. This makes it easier to find the contents when the lid is open, and the slim shape fits snugly on the bike's top tube.

Magnetic closure makes it easy to use with one hand

The magnetic closure with a twist lock allows you to quickly open and secure the bag. An elastic cord also helps keep the flap in place, reducing the risk of contents slipping out when riding over bumps.

Fastening straps make installation on the bike quick and easy

The bag attaches to the top tube with straps, allowing you to quickly get your bike ready for a ride. The sleek, streamlined design fits snugly against the frame, and the reflective logo enhances visibility after dark.

The capacity of 0.6 l is enough for handy accessories

The bag's interior allows you to carry your most frequently used items, such as a phone, small tools, glasses, keys, or small bike accessories. This keeps small items within easy reach while keeping your clothing pockets free while riding.

Waterproof design works well on the road

600D TPU-laminated polyester and an IPX4 rating help protect your belongings from splashes. This is a practical solution for daily commutes and trips in rapidly changing weather.

Four-sided PP board supports stable shape

Four-sided reinforcement helps the bag maintain its shape when attached to the frame. This makes it easier to find the contents when the lid is open, and the slim shape fits snugly on the bike's top tube.

Magnetic closure makes it easy to use with one hand

The magnetic closure with a twist lock allows you to quickly open and secure the bag. An elastic cord also helps keep the flap in place, reducing the risk of contents slipping out when riding over bumps.

Fastening straps make installation on the bike quick and easy

The bag attaches to the top tube with straps, allowing you to quickly get your bike ready for a ride. The sleek, streamlined design fits snugly against the frame, and the reflective logo enhances visibility after dark.

Welded joints support water protection

The bag is made of 600D polyester laminated with TPU, and its construction limits moisture penetration. This ensures items carried on the handlebars are better protected during rain, splashes, and wet riding.

The 2-liter capacity is perfect for shorter trips.

The bag's interior holds handy accessories like sunglasses, a bike lock, a computer, a pump, or small tools. A long zipper allows for quick access to the contents, so you can grab your essentials without removing the bag from your handlebars.

The knob and cord facilitate stable fastening.

The dial-style mounting system allows you to adjust the tension and securely hold the bag against your handlebars. A strong cable and straps make it quick to install and remove, making it especially convenient for frequent cycling.

PP side panels help maintain shape

PP board reinforcement on the sides supports the bag's cylindrical shape and limits its deformation. This design helps protect carried accessories from being compressed and helps maintain order inside.

Details make it easier to use while driving

A clear window allows you to quickly identify the bag's contents, and a side mesh pocket is perfect for small items you need to keep close at hand. The extended zipper pull makes it easy to use even with gloves on, and the reflective logo enhances visibility after dark.

Large pressure gauge - you always know how much air is in the tire

The external pressure gauge with a clear dial displays pressure in PSI and kg/cm² up to 160 PSI. The large scale makes readings easy even in challenging conditions—no guessing if the tire is properly inflated.

Retractable hose - ready for action at any time

The pump's flexible hose retracts directly into the body, eliminating the risk of loss or tangling. It's easy to remove before inflating, and it retracts back into place after use.

Air release button - precise pressure adjustment

The built-in pressure release button allows you to quickly release tire pressure without having to unscrew the head. This is convenient when you want to set the exact pressure you need.

AV/FV head - one pump for different bikes

With the ability to switch between AV (Schrader) and FV (Presta) valves, the pump is suitable for city bikes, road bikes, and mountain bikes alike. Changing modes requires no tools – simply rotate the head insert.

Aluminum and minimal weight - durability without compromise

The body, made of CNC-machined and anodized aluminum alloy, is resistant to mechanical damage and corrosion. Weighing approximately 166g and measuring just 22.5cm long, the pump doesn't weigh down your bike or panniers.

Anti-slip pins keep the shoe on the platform

Eight pins on each side of the pedal provide effective grip regardless of the surface or weather conditions. Your foot remains stable on both urban paths and off-road terrain.

Reflective elements increase safety at night

Side reflective stripes make the cyclist more visible to other road users after dark - without the need to install additional lighting.

Wide platform provides comfort and stability

The 10.5 x 9.5 cm platform gives your foot comfortable and stable support while pedaling, which you will especially feel during longer bike rides.

Sealed bearings run smoothly for a long time

The sealed bearing design protects the mechanism from water and dirt ingress, which translates into long-lasting smooth rotation and reduced maintenance requirements.

Chrome-molybdenum steel axle ensures durability of the structure

The chrome-molybdenum steel axle withstands heavy loads without deforming, while the nylon platform keeps the overall weight low – a combination that will last for many seasons.

Anti-slip pins for a stable foot position

Galvanized steel pins placed on the platform ensure firm contact between the sole and the pedal, preventing foot slippage even during intense pedaling or riding in the rain.

Aluminum body - durability without unnecessary weight

The aluminum alloy combines high resistance to mechanical damage with low weight. A pair of pedals weighs approximately 276 g, which you'll feel comfortable with on both your daily commute and longer rides.

Reflective inserts increase safety after dark

Built-in ABS and PP reflective elements reflect the light of oncoming vehicles, improving your visibility on the road in the evening and at night - without the need for additional equipment.

Sealed bearing for smooth and long-lasting operation

A single sealed ball bearing ensures smooth rotation of the platform around the axis and effectively protects the mechanism against the ingress of water and dirt, which translates into a longer lifespan of the pedals.

Compatibility with various types of bikes

The C700 pedals are compatible with mountain bikes, road bikes, and folding bikes, making them suitable for everyday urban riding as well as more demanding off-road routes.

Anti-slip spikes keep your foot firmly in place

Steel spikes placed across the entire surface of the platform ensure foot stability while pedaling - both on dry surfaces and in more difficult off-road conditions.

Reflective inserts increase safety at dusk

Built-in acrylic inserts reflect vehicle light, making the cyclist more visible when riding at night or in the evening without any additional accessories.

The nylon platform is lightweight and damage-resistant

The nylon construction means the pedals weigh approximately 362g per pair, yet effectively withstand everyday loads and contact with the terrain.

The bearings ensure smooth and quiet operation

Each pedal is equipped with a bearing that minimizes rotational resistance and extends the durability of the entire mechanism - without the need for frequent adjustments.

Fits folding, mountain and road bikes

Thanks to the standard thread, the axle fits most popular types of bikes, making the Rockbros BP2501 pedals a versatile choice regardless of your riding style.

Nylon fiber and Cr-Mo axle - pedals resistant to everyday challenges

The pedal body is made of high-quality nylon fiber and the axle is made of chrome-molybdenum steel. This combination makes the Rockbros RK01 pedals resistant to impacts, abrasion, and corrosion—without adding unnecessary weight to your bike.

Anti-slip spikes provide firm foot support

Four spikes on each side of the platform effectively prevent the foot from slipping, both during dynamic off-road riding and daily commutes on wet asphalt.

Sealed bearings protect the pedals from water and dust

Sealed bearings ensure the pedal axle is well protected against water and dirt ingress. The pedals operate smoothly even after riding in the rain or on dirt trails.

Wide platform fits most cycling shoes

The 9 x 10.4 cm surface provides stable and comfortable support for your foot regardless of shoe type. This makes the pedals suitable for both sports and everyday footwear.

9/16" thread compatible with most bikes

The standard 9/16" axle thread allows you to mount RK01 pedals on most mountain, trekking, folding, road and city bikes. The L and R markings facilitate correct assembly without mistakes.

The wide platform increases foot stability

The approximately 11 x 11 cm footprint provides ample support under the sole and helps distribute pressure over a larger area, allowing the foot to maintain a more stable position during both leisurely commutes and more challenging rides.

Double-sided pins improve grip

Each side of the pedal features 14 protruding pins that increase friction between the platform and the sole of the shoe. This reduces the risk of slipping when riding in the rain, mud, or on uneven terrain, and promotes more confident cycling.

Sealed design protects bearings

The bearings are protected from direct ingress of water, moisture, dust, and fine debris. This helps maintain smooth pedal movement in changing conditions and limits the impact of external factors on the mechanism's operation.

Side markings facilitate correct assembly

The axles are marked with L and R, indicating left and right pedals, respectively. This allows for quick alignment of the components with the correct crank arms and reduces the risk of errors during installation or subsequent replacement.

Designed to suit a variety of riding styles

The platform design works well on mountain bikes, road bikes, city bikes, folding bikes, and other models using a classic pedal mounting system. The black color and simple shape make it easy to match the accessory to various bike designs.

24 anti-slip spikes for a secure contact with the pedal

A total of 24 spikes are placed on both sides of the platform, ensuring excellent grip of the shoe - both on dry surfaces and when riding in the rain or on uneven terrain.

Sealed bearings protect against sand and water

Sealed bearings effectively protect the pedal's interior from contaminants. The pedals operate smoothly and reliably, even after intense riding in challenging conditions.

Aluminum platform - lightweight and damage-resistant

The aluminum body combines low weight with high durability. The pedals withstand everyday use and the stresses typical of off-road riding.

9/16" thread compatible with MTB and BMX bikes

The standard 9/16" axle thread makes the pedals fit most mountain bikes and BMX bikes without the need for additional adapters or modifications.

L and R markings facilitate mistake-free assembly

Clear left and right pedal markings allow for easy installation, even for those with no experience. This simple detail saves time and eliminates the risk of damaging the threads by mistakenly tightening them.

Wide platform for comfort and stability

The 104 x 100 mm platform evenly supports the foot while riding, reducing muscle fatigue. This solution will be appreciated by cyclists who spend long hours in the saddle, both on mountain bike trails and in the city.

Reflective stripes increase safety after dark

Reflective side strips make the pedals visible in low light conditions—at dusk, at night, or in poor weather. It's a simple yet effective feature that enhances safety on every ride.

Sealed bearings for smooth operation

Sealed DU bearings with a pre-lubricated mechanism protect the pedals from dirt and moisture. A chrome-molybdenum steel axle with a carbon fiber bushing ensures durability and corrosion resistance.

Steel pins hold your foot securely on the pedal

Nine stainless steel pins on each side prevent the shoe from slipping, even during intense off-road riding or on wet surfaces. Three additional replacement pins are included in the set.

9/16" thread fits most bikes

The standard 9/16" axle thread allows for installation on MTB, road, city, BMX, and folding bikes. The axle is marked with the letters L and R, eliminating the risk of installation errors when using a 6mm hex key.

Steel spikes and a sculpted surface hold your foot securely in place

Five threaded steel spikes positioned on the platform effectively lock the shoe in place while pedaling. The sculpted surface further increases friction, ensuring your foot remains stable on both dry roads and more challenging off-road conditions.

Aluminum and Cr-Mo steel - construction resistant to everyday use

The platform, made of high-strength aluminum alloy, is impact- and abrasion-resistant, while the chrome-molybdenum steel spindle resists corrosion even under heavy use. A carbon fiber bushing around the spindle further reduces weight and improves the durability of the entire setup.

Sealed bearings ensure smooth and quiet operation

The combination of a sealed ball bearing and a DU plain bearing ensures smooth and silent pedal rotation. The seal protects the bearings from water and dirt, ensuring long life and comfortable long-distance riding.

L and R markings facilitate correct pedal assembly

The spindles are clearly marked: CR-L for the left pedal, CR-R for the right. This makes assembly quick and error-free, even for those trying to change pedals on their bike for the first time.

9/16" thread ensures wide compatibility with popular bikes

The standard 9/16" thread allows the K307PT pedals to be mounted on mountain bikes, road bikes, BMX bikes, folding bikes, cross bikes, cruisers, and many other types of bikes. This makes them suitable for both cyclists looking for a new platform and for replacing worn pedals on an existing bike.

The wide platform provides stability on any route

The 10.5 cm wide platform provides secure footing, whether you're cruising leisurely around town or adventurous off-road riding. The large contact patch allows for natural foot positioning and easy adjustments while riding.

Low weight that really improves driving comfort

A pair of pedals weighs only approximately 304g. Less unsprung mass means less resistance with each crank rotation, which translates into better energy utilization – especially noticeable on long rides.

Anti-slip lugs keep your shoe firmly on the pedal

Metal lugs on both sides of each pedal increase friction between the sole of the shoe and the platform, preventing the foot from slipping during sudden maneuvers or when riding on uneven surfaces.

DU bearing and Cr-Mo spindle ensure durability

The combination of a DU bearing and a hardened Cr-Mo steel spindle guarantees smooth rotation and resistance to intensive use. The pedals withstand changing weather conditions and the regular stresses of everyday riding.

9/16" thread fits most bikes

The standard 9/16" thread allows you to mount Rockbros M906 pedals on mountain bikes, road bikes, city bikes, and BMX bikes without the need for additional adapters. CR-L (left) and CR-R (right) markings facilitate correct installation.

CNC milled aluminum - light and solid at the same time

The pedal bodies are made of an aluminum alloy using CNC machining, ensuring high precision and excellent mechanical durability. A pair of pedals weighs just 380 g, ensuring they don't add any weight to the bike while still withstanding heavy loads, even on challenging terrain.

The pedals are waterproof thanks to sealed bearings

Sealed DU bearings with internal lubrication protect the mechanism from water and dust. The chrome-molybdenum steel axle with a carbide bushing is corrosion-resistant and ensures quiet, smooth operation for a long time – regardless of the weather.

Anti-slip pins provide firm foot support

Each platform is equipped with nine stainless steel pins on both sides. Three spare pins are included, allowing for replacement if necessary. This solution effectively holds the shoe on the pedal during both leisurely riding and fast descents.

Wide platform for better driving comfort

The 104 mm wide platform evenly distributes foot pressure, reducing fatigue on long rides. The large support surface is suitable for both recreational and sporty riding – both off-road and on-road.

Fits most popular types of bikes

The standard 9/16" axle thread allows for installation on mountain, road, BMX, city and trekking bikes. Installation is done using a 6mm hex key - right and left sides are clearly marked on the axle nut.

The pedals are waterproof thanks to sealed bearings

Sealed DU bearings effectively block water and dust from entering the mechanism. They ensure quiet, smooth operation without unwanted noise, while a chrome-molybdenum steel axle with a carbon fiber bushing provides additional corrosion protection.

The CNC-milled aluminum body guarantees durability

The pedals, made of CNC-machined aluminum alloy, combine low weight with high resistance to deformation. Their solid construction ensures reliable operation on both forest trails and city rides.

Anti-slip pins provide stable support for the foot

Nine stainless steel pins are mounted on each side of the platform to firmly hold the sole of the shoe in place. Three additional replaceable pins are included to extend the pedals' lifespan.

Wide 104 mm platform increases ride comfort

The large support surface evenly distributes pressure across the entire foot, reducing fatigue during long rides. The flat platform profile makes the pedals comfortable for a wide range of cyclists.

9/16" thread fits most popular bikes

The standard axle size allows for quick installation using a 6mm hex key without the need for adapters. The pedals are compatible with mountain bikes, road bikes, BMX bikes, and city bikes.

Wide platform for a secure foothold

The large pedal surface provides solid footing while climbing, descending, or maneuvering quickly on the trail. Regardless of shoe size, the foot rests firmly and comfortably on the pedal throughout the ride.

Anti-slip spikes keep your foot in place

Ten steel spikes on each side of the pedal effectively increase friction between the sole of the shoe and the pedal. The manufacturer includes spare spikes in the kit, ensuring excellent grip for extended use.

Sealed DU bearings for quiet and smooth operation

Sealed DU bearings effectively protect the internal mechanism from water, mud, and dust. The pedals rotate smoothly and quietly, even after long rides in challenging weather conditions.

Nylon composite and Cr-Mo steel - strength without unnecessary weight

The reinforced nylon composite body is corrosion- and impact-resistant, while the Cr-Mo steel spindle ensures mechanical durability. A pair of pedals weighs just 416g, reducing fatigue on long rides.

Simple assembly suitable for many types of bikes

The standard 9/16" thread means the pedals can be installed without specialized tools. L (left) and R (right) markings on the stems eliminate the risk of confusion, and compatibility includes mountain bikes, folding bikes, BMX and road bikes.

Quick assembly thanks to the quick-connect system

The quick-release mechanism allows you to remove the pedals with a single press of the lock – no keys or tools required. This is a convenient solution for cyclists who frequently travel with a folding bike or want to quickly change pedals on the go. The axle, marked L and R, facilitates correct assembly on either side of the crank.

Sealed bearings resistant to water and dust

An aluminum sealing cover protects the bearings from moisture and contaminants. The Rockbros K3462F-BK pedals are waterproof and dustproof, so you can ride in the rain or on muddy roads without worrying about the durability of the mechanism. The bearings maintain smooth operation even after prolonged use.

Wide platform for better driving control

The approximately 8.2 cm wide platform fits snugly against the shoe sole, ensuring stable and even power transfer to the drivetrain. The wider support surface reduces foot fatigue on longer rides and improves overall bike control.

Steel spikes ensure a secure foot grip

Each platform is equipped with six anti-slip steel spikes with a galvanic protective coating. The spikes firmly grip the sole of the shoe, preventing slippage during dynamic riding – both off-road and in the city.

CNC aluminum with anodization - durability and corrosion resistance

The pedal body is made of CNC-milled aluminum and anodized, which strengthens the surface and protects against oxidation. The chrome-molybdenum steel axle ensures a durable connection to the crankset and resistance to deformation during intensive use.